What does 1C mean in wood?

Number 1 Common (No. 1C) The Number 1 Common grade is often referred to as the Cabinet grade in the USA because of its adaptability to the standard sizes of kitchen cabinet doors used throughout the United States. Number 1 Common is widely used in the manufacture of furniture parts as well for this same reason.

What are the grades of Douglas fir?

A “select” grade Douglas fir plank. The most perfect boards are known as “Selects” or “Finish” grade boards. Within those “Select” and “Finish” the grades have different names depending on which agency graded them. In general, the higher the letter grade, the less-knotty and more even in color it will appear.

What is the difference between #1 and #2 grade lumber?

#1 Grade: When appearance becomes more of a factor, #1 Grade will contain smaller, fewer, sound, tight knots and have less wane than found in #2 Grade. Keep in mind, that with the introduction of Prime grades, #1 Grade no longer contains some of the better grades that used to be included.

What is BTR lumber grade?


BTR Better
#3BTR #3 & Better
B&B B & Better
CON COM Construction Common Redwood
CON HEART Construction Heart Redwood

What is the best grade of wood?

FAS (First and Second) is the highest grade of hardwood lumber. It’s usually 6-inches x 8-inches and is 83 percent defect-free on its best side. Select is 4-inches x 6-inches and 83 percent defect free on its best side.

What is the highest grade of wood?

What Does a Lumber Grade Mean? Grades are based on the amount of usable clear material in a board. The highest grade boards are FAS and Select, followed by #1 Common and #2 Common.

What is #1 Doug Fir?

A: A #1 Free Of Heart Center is a high-quality appearance timber. It’s the ideal balance of strength and appearance and is excellent for exposed applications.

What is the best grade of softwood lumber?

The best grade is called Factory Select or Select Shop; the remaining grades are usually numbered in order of decreasing quality, No. 1, No. 2, and No. 3.

What is the best grade of lumber?

What does #2 grade wood mean?

2 lumber is the most common grade for framing. Lumber of this grade contains few defects, but knots are allowed of any quality as long as they are well spaced and do not exceed the size regulations.

What are three lumber defects?

Common Wood Defects: Types & Causes of Lumber Issues

  • Checks and Splits. A check is a term used to describe a crack that runs through a board, usually running lengthwise.
  • Rot and Decay. Rot and decay is the general description for the disintegration of wood fiber.
  • Ring Shake.
  • Pitch, Gum and Sap.
  • Wane.
  • Crook or Crown.
  • Bow.
  • Cup.

Which is the best grade of cherry wood?

The clearest standard grade for cherry lumber is FAS-Select-Prime, all 3 of these grades require 83 1/3% or better clear face cuttings. Color is determined by the percentage of red heartwood on the face and in some cases the reverse side of the board. Often times we have red one face material available at greatly reduced prices.

What kind of lumber does wood vendors use?

WORKABILITY : Works easily, finishes beautifully. Glues up and takes stain well. Wood Vendors supplies only the finest Cherry Lumber from Pennsylvania (or northern cherry upon request) insuring not only consistent quality but high yielding lumber as well.

What are the mechanical properties of clear wood?

Clear wood specimens are usually considered “homogeneous” in wood mechanics. Many of the mechanical properties of wood tabulated in this chapter were derived from extensive sampling and analysis procedures. These properties are represented as the average mechanical properties of the species.

What is the color of a cherry tree?

Cherry’s color ages to a richer, rusty red brown with any clear finish.” Reddish brown with a golden luster. Freshly cut cherry is often very pale, but the wood oxidizes to its famously favorable rich brown red in time. What’s the Tree Like?