How do you take care of your bike after it rains?
How to Clean Your Bike in 10 Minutes After a Ride in the Rain
- Get the gunk off. The water, oil and other foreign substances on the road can leave some pretty gross residue on your bike frame and components.
- Clean the wheels and brakes.
- Dry the bike.
- Clean and lube the drivetrain.
- Polish the frame (for extra credit).
How do I oil my bike after rain?
Lube The Cables To keep your bike shifting and braking well, drip a small amount of lubricant onto the cables where they enter the housing. Once capillary action carries a few drops of lubricant into the housing, shift through your gears a few times and squeeze the brakes repeatedly to help the lubricant find its way.
Is WD40 good for bike chains?
“As a matter of fact, WD40 will actually strip away any existing lubricant and leave your drivetrain dry – metal on metal. You can use WD40 to clean your bike chain with no problems – but you should wash all the product away before applying a regular chain oil.
How do you dry a bike after rain?
Once your bike is clean, use an old towel to get it dry. Rubber parts like tires and grips don’t need a lot of attention, rather focus on all the metal parts. Really try to address the steel hardware and make sure it’s dry to the touch before you’re done.
Should I lubricate my bike chain after rain?
If it’s dry and squeaky when you’re riding, it’s time to lubricate. This is likely going to be after riding in heavy rain or if you’ve never ever oiled your chain. Excess lube attracts dirt and dust and creates gross buildup on your drivetrain.
Is WD-40 good for bike chain?
WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free. It also minimizes the accumulation of dirt which reduces the wear and tear of the chain.
What kind of tools do I need for bike maintenance?
Routine maintenance can include cleaning and lubing your chain, replacing brake pads, and changing and fixing a flat tire. For these more simple tasks, we recommend the following tools as a good starting point: Allen® wrench set (ranging from 2-12mm in size) Open end wrenches (6-17mm) Chain brush. Chain lube and cleaner.
What should I do with my bike after riding in the rain?
1. Clean Your Bike ASAP There’s a reason that cyclocross pit mechanics immediately sprint for the washer after a race: Leaving a bike muddy after riding in the rain just means more work later. While your bike is wet, at least spray it down to get mud and grit off the frame, tires, chain, and derailleur before it dries and hardens.
What do you need to know about bike maintenance?
Bike maintenance is a wide-ranging topic, so in this article we start with the basics: a pre-ride inspection, securing bolts, and cleaning and lubricating key components. Also, don’t overlook regular maintenance by a bike mechanic.
Is it necessary to have a bike repair stand?
If you’re planning on doing even the most basic bike repair maintenance, don’t underestimate the importance of a quality repair stand. Yes, they can be a little expensive and yes, they take up a little room in the garage.