How do you size a full overlay cabinet door?

Overlay refers to how much the door overlaps on the hinge side. You can determine this by measuring the width of the door, subtract the width of the opening and divide that in half. For example, if the door is 1” wider than the opening, that means it overlays 1/2″ on each side, so you would select 1/2″ overlay hinges.

How much space do you need between full overlay cabinet doors?

1/4″
Make sure you have at least 1/4″ reveal (gap between doors). If you go less than 1/4″, then you may run into problems with the operation of the doors. Some cabinets may have stile and rail widths that vary from one part of the cabinet to another.

How many inches is a full overlay?

The correct determination for full overlay is typically 3/4 inch on all sides. For example, if the door opening in the cabinet face frame is 12 by 18 inches, the size for a full overlay door would be 13 1/2 by 19 1/2 inches.

What is the difference between a full overlay and half overlay hinge?

Full overlay doors cover all or nearly all the front edge of the cabinet side on a frameless cabinet. Half overlay doors cover a little less than half (typically 5/16″) of the cabinet side, so that two doors hinging on opposite sides of a 3/4” partition will have 1/8” of space between them.

What is standard cabinet overlay?

Standard Overlay Cabinets With a standard overlay, your cabinet doors don’t meet in the middle. Instead, there is a face of cabinet in between the two doors. While more affordable, this option makes it difficult to put wide bowls or serving trays in your cabinets.

How much gap do you leave between cabinet doors?

The normal plan is to aim for a 1/8″ gap between pairs of doors that cover one opening.

How much overlay is a full overlay hinge?

What is considered full overlay?

Full Overlay Cabinets Defined Full overlay cabinets have doors and drawers with extra-large fronts. These are designed to fully cover the face frame. Whereas the face frame is entirely visible on an inset cabinet, it is completely hidden on a full overlay cabinet. Hinges are hidden from view as well.

What is standard overlay vs full overlay cabinets?

Full Overlay Cabinets The doors and drawers on a full overlay cabinet cover the face frame almost completely with a ¼ inch of space between the doors and drawers. This differs from a standard overlay which has at least 1 ¼ inches on all sides of the doors and drawers.

Are full overlay cabinets more expensive?

Lower Cost: Full overlay cabinets take less skill to install and are therefore less expensive. More Storage: Because the doors are mounted on the face frame instead of inside it, there’s more room to squeeze large items through the opening than in inset cabinets.

What is a full overlay door on a cabinet?

A full overlay is a cabinet door that conceals the opening to the storage area . This type of door or drawer front leaves very little gaps between the adjacent openings so that only a small portion of the cabinet box is visible between units. A full overlay fully rests on the cabinet opening when it is closed.

What does full overlay mean for cabinets?

Full Overlay. If your cabinets are designed for full overlay, it means that the doors completely overlap the opening on all four sides. The correct determination for full overlay is typically 3/4 inch on all sides. For example, if the door opening in the cabinet face frame is 12 by 18 inches, the size for a full overlay door would be 13 1/2 by 19 1/2…

How do you measure cabinet doors?

On single doors simply measure the cabinet’s opening size and add 1-inch to both the width and height. For instance, if the cabinet opening size is 12-inches wide and 24-inches high, the door size will be 13 x 25. On wider cabinets with two doors (butting in the center), measure the width of the opening, add 1-inch, then divide by 2.

What is a full overlay cabinet?

Full Overlay Cabinets. Full overlay cabinets are also called Euro-style cabinets. This type of construction has the drawers and doors completely covering the face frame. The doors and drawer fronts create a continuous surface, giving a more uniform look to your cabinets.