How do I telnet to a different port?

One of the biggest perks of Telnet is with a simple command you can test whether a port is open. Issuing the Telnet command telnet [domainname or ip] [port] will allow you to test connectivity to a remote host on the given port.

What is the correct Telnet port number?

23
The default port for Telnet client connections is 23; to change this default, enter a port number between 1024 and 32,767.

How do I fix Telnet port 23?

Resolutions

  1. Click the Start menu then search for/select Windows Firewall.
  2. Select Advanced Settings.
  3. Select Inbound Rules from the left hand pane.
  4. Under Inbound Rule Actions.
  5. For the Rule Type select Port, click next, then select TCP and Specific Local Ports.
  6. Enter 23 for the port number and click next.

Can we change port number of https?

2 Answers. The port number is not “magic”, you can use any port from 1-65535 you like. There are only 2 conditions: Both the server and the client have to (agree to) use the same port number.

Which port number should I use?

Port numbers above 1023 can be either registered or dynamic (also called private or non-reserved). Registered ports are in the range 1024 to 49151. Dynamic ports are in the range 49152 to 65535….Well-Known Ports.

Port Number Service Brief Description of Use
49151 Reserved Reserved for future use

What is Port No 80?

On a Web server or Hypertext Transfer Protocol daemon, port 80 is the port that the server “listens to” or expects to receive from a Web client, assuming that the default was taken when the server was configured or set up. By default, the port number for a Web server is 80.

How to change the TCP port for telnet requests?

To change the TCP port for Telnet requests, in the Port Number field for Telnet, enter the port number that you want to use. Valid port numbers are 23 or a port number from 9000 through 65355. The default port for Telnet is port 23. To change the TCP port for SSH requests, in the Port Number field for SSH,…

What kind of Port do I need for telnet?

Telnet is a small application that can be used on your local device to communicate using a textbase, command line, bidirectional interactive terminal. Telnet use port 23 as the default telnet port to send and receive text data over the network.

How do I Change my TCP port number?

To change the TCP port for HTTP requests or Telnet requests by using the Web Agent: In the navigation pane, expand the System > Administration folders. Click TCP ports. The TCP Ports Web page is displayed in the content pane. See Figure 21.

How to set up a telnet connection on my computer?

1 From the Connection menu, select Connection Setup. 2 Choose Network, then select TELNET from the Connect Using list. 3 Click More Settings to open the More Settings – TELNET dialog box. 4 Enter the TCP port number that your host computer uses for a Telnet connection. Click OK. 5 Click Connect to make your Telnet connection.