How do I get into the BIOS on a Sony Vaio?

While most VAIO-based laptops disclose the appropriate BIOS keyboard key, other laptop configurations are not as intuitive.

  1. Turn on or restart your Sony VAIO computer, allowing it to show its initial splash screen or main logo.
  2. Press the “F2” key on your keyboard to enter the BIOS.
  3. Modify the required BIOS settings.

Which key to press to boot from USB in Sony VAIO?

Turn on the computer. Immediately hold down the Fn key and press the F2 key. NOTE: The keys must be pressed before the VAIO logo is displayed.

How do I get into BIOS on Windows 10?

To enter BIOS from Windows 10

  1. Click –> Settings or click New notifications.
  2. Click Update & security.
  3. Click Recovery, then Restart now.
  4. The Options menu will be seen after executing the above procedures.
  5. Select Advanced options.
  6. Click UEFI Firmware Settings.
  7. Choose Restart.
  8. This displays the BIOS setup utility interface.

How do I disable BIOS at startup?

Access the BIOS utility. Go to Advanced settings, and choose the Boot settings. Disable Fast Boot, save changes and restart your PC. Set your HDD as the primary booting device and confirm changes.

How do I turn on assist button on Sony Vaio?

Perform System Recovery Using VAIO Care Rescue Mode

  1. Press and hold the power button until your computer turns off.
  2. On the keyboard, press the ASSIST button.
  3. On your keyboard, press the F10 key to select the Recover or maintain your System [F10] option.
  4. Choose your preferred keyboard layout.

How can I access the BIOS on my Vaio?

In the VAIO Care (Rescue Mode) screen, click the Start BIOS setup option. In the Setup Utility screen, use the Arrow keys to navigate through the various setup screens and options, and use the Enter key to select different screens and options.

Where is the ASSIST button on a VAIO computer?

Refer to the operating instructions supplied with the computer for the exact location of the Assist button on your model. At the VAIOCare | Rescue Mode screen, use the Arrow keys to highlight the Start BIOS setup [F2] option, and then press the Enter key.

How do I Exit my Sony VAIO laptop?

To exit a screen or option, press the ESC key. When you’re finished making changes, press the ESC key until the Exit menu appears. Press the F10 key to save and exit the utility. If your older Sony VAIO laptop is still running Windows 7, start by shutting down the machine and then restarting it.

How do I reset the BIOS on my computer?

In the Setup Utility screen, use the Arrow keys to navigate through the various setup screens and options, use the Enter key to select different screens and options, and use the ESC key to exit the different screens or options. IMPORTANT: To reset the computer BIOS to the original default values, press the F9 key and then save the changes and exit.