Why is my check engine light on Kia Sportage?

If the check engine light in your Kia Sportage starts flashing, that means that the problem needs sudden attention and your Kia should be transported in shortly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.

What does the check engine light mean on a Kia?

The check engine light essentially means that your vehicle’s onboard computer system has self-diagnosed some kind of problem. This problem can be anything from a momentary hiccup, something like a loose gas cap or a change in humidity, to the failure of a major component like a bad catalytic converter.

What could be wrong if check engine light comes on?

The light could be a minor issue, such as a faulty gas cap, or it could mean something more serious, such as a misfiring engine. The check engine light — more formally known as the malfunction indicator lamp — is a signal from the car’s engine computer that something is wrong.

How do you reset the check engine light on a Kia Sportage?

How Do You Reset Your Check Engine Light?

  1. Turn off your ignition.
  2. Don some safety glasses and gloves.
  3. Locate the negative terminal.
  4. Loosen the negative terminal’s nut with a wrench, then pull the connector from the battery, keeping it to the side for 30 to 60 seconds.
  5. Reconnect the cable and tighten with your wrench.

How do you turn off the check engine light on a Kia Sportage?

Why would your check engine light came on and then go off?

In a perfect world, you’ll find that a check engine light on and off intermittently is being caused by a loose gas cap. But many times, a check engine light will be caused by something other than a loose gas cap. It can, for example, be caused by a faulty oxygen sensor.

What causes a flashing check engine light on a Kia Sportage?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Sportage’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped .

Where is the Check Engine light on a Kia?

To determine why your Kia to check engine light is on, you should start by reading the fault codes. You can read Kia check engine light codes yourself using an OBD-II scanner. This method applies only to Kia vehicles that are the model year 1996 and newer. Locate the OBD-II port under the dashboard.

Why does my Kia Sportage not start up?

Crank/Cam Sensor- When the cam or crank sensors are not being read by the ECM/PCM, it’s impossible to get the ignition timing right. If you Sportage does start at all, it’ll run rough. It could be a more serious mechanical issue, such as as bent valve, bad lifter, etc….

What does a flashing check engine light mean?

A flashing check engine light is your Kia Sportage’s way of saying “I have a serious problem, don’t ignore me”. Most of the time, that serious problem is a misfire. This flashing light should not be ignored. When your engine is misfiring, it is dumping raw fuel into the exhaust.