What size wood can a 10 inch miter saw cut?
Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
What size miter saw Do you need to cut a 4×4 post?
It shouldn’t be a matter of whether a 10-inch miter saw can cut a 4×4, but rather what miter saw is better suited for cutting 4x4s? The short answer is, you need a 12 inch miter saw.
Which miter saw can cut a 4×4?
A 12-inch miter saw is the best saw to cut 4×4 posts in a single pass. This is before you install them on the ground. You need to use a circular saw to cut a 4×4 post in the ground. Depending on the blade size you may need to make several passes to achieve a clean cut.
How deep can a 10 inch sliding miter saw cut?
Generally speaking, a 10 inch saw can cut slightly over 3″ deep.
Can a 7 1 4 miter saw cut a 4×4?
You won’t get through a 4×4 in one cut with a 7-1/4″ (max cut size will be less than (blade size – arbor size) / 2 = (7-1/4 – 5/8)/2 = less than 3-5/16″). It’s not just a 4×4 you can’t cut; you can’t even cut a 2×4 (unless the saw has rails the blade pulls on).
Are sliding miter saws accurate?
Chop-cutting accuracy at 90° was on par with other saws at 1/256 inch in 4 inches and slide accuracy was good at 1/128 inch in 12 inches. While the 90° straight cuts were good, slide miter cuts were only fair. The blade shows some measurable and visible wobble and the head has some deflection.
Can I cut a 4×4 with a 12-inch miter saw?
A 12-inch miter saw will do a better job than a 10-inch miter saw. It can cut longer and thicker stocks. Regardless of whether a 12-inch miter saw is a sliding type or not, it will handle a 4×4 stock without any issues.
How thick can a Mitre saw cut?
Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights. This larger saw can cut a maximum thickness of 3 1/2 inches, enough to cut through four-by-fours.
Will a 12 sliding miter saw cut a 6×6?
The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6.
Will a 12 miter saw cut a 4×4?
How deep can a 7 1 4 Mitre saw cut?
The RYOBI 7-1/4-Inch Sliding Miter Saw is a new edition to the miter family. It can make angled cuts up to 450 on boards all the way up to 6 inch wide, and has a max RPM of 5,350.
What is the advantage of a sliding miter saw?
Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.