What is the viscosity of sulfuric acid?
26.7 cP
Sulfuric acid
| Names | |
|---|---|
| Viscosity | 26.7 cP (20 °C) |
| Thermochemistry | |
| Std molar entropy (So298) | 157 J·mol−1·K−1 |
| Std enthalpy of formation (ΔfH⦵298) | −814 kJ·mol−1 |
What is the dynamic viscosity of SAE 30 oil at 40 C?
Dynamic viscosities for motor oils SAE 10 to 50 – temperature range 0 – 100 deg C
| Dynamic Viscosity (N s/m2) | ||
|---|---|---|
| SAE | Temperature (oC) | |
| 30 | 1.53 | 0.310 |
| 40 | 2.61 | 0.430 |
| 50 | 3.82 | 0.630 |
Which fluid has highest kinematic viscosity?
Kinematic viscosities of common liquids like motor oil, diesel fuel, peanut oil and many more. Viscosity is resistance to shear or flow in a fluid – and a measure of the adhesive/cohesive or frictional property. Viscosity arising due to internal molecular friction produces the frictional drag effect.
What is the kinematic viscosity of olive oil?
about 84 cP
Water viscosity at 20 ∘C is 1 centipoise (1 cP), while the viscosity of olive oil at 20 ∘C is about 84 cP.
What is the viscosity of SAE 30 oil at 20 C?
Dynamic Viscosity
| Dynamic viscosities of some fluids at 1 atm and 20°C (unless otherwise stated) | |
|---|---|
| Fluid | Dynamic Viscosity µ, kg / m · s |
| SAE 10W30 | 0.17 |
| SAE 30 | 0.29 |
| SAE 50 | 0.86 |
What is the viscosity of SAE 30 oil?
Automotive Lubricant Viscosity Grades: Engine Oils – SAE J 300, Dec. 1999
| SAE Viscosity Grade[°C] | Min. Viscosity [mm²/s] at 100 °C | Max. Viscosity [mm²/s] at 100 °C |
|---|---|---|
| 30 | 9.3 | <12.5 |
| 40 | 12.5 | <16.3 |
| 40 | 12.5 | <16.3 |
| 50 | 16.3 | <21.9 |
What is kinematic viscosity equal to?
The kinematic viscosity is an atmospheric variable defined as the ratio between the dynamic viscosity μ and the density ρ of the fluid, i.e. and depends on both air temperature and pressure. For air at sea level pressure and 20 °C, ρ = 1
Which cooking oil has the lowest viscosity?
walnut oil
Rice bran oil was the most viscous (0.0398 Pa·s at 38°C) while walnut oil was the least viscous (0.0296 Pa·s at 38°C) among the oils studied.
What is the density of SAE 30 g mL?
Density of Engine Oil, SAE 30 in a few select units of density measurement: Density of Engine Oil, SAE 30 g cm3 = 0.8754 g/cm³. Density of Engine Oil, SAE 30 g ml = 0.8754 g/ml.
What is the viscosity rating of SAE 30 oil?
SAE 30 oil is a motor oil that has been given a viscosity rating of 30 by the Society of Automotive Engineers, according to AA1Car Automotive Diagnostic Help Center. Motor oils typically have ratings from 0 to 50. Viscosity. Viscosity is a measure of how well an oil pours at a given temperature.
How to calculate the density of engine oil?
Density of Engine Oil, SAE 30 in a few select units of density measurement: Density of Engine Oil, SAE 30 g cm3 = 0.88 g/cm³ Density of Engine Oil, SAE 30 g mm3 = 0.00088 g/mm³ Density of Engine Oil, SAE 30 kg m3 = 875.4 kg/m³
How much does SAE 30 weigh per cubic meter?
Engine Oil, SAE 30 weighs 0.8754 gram per cubic centimeter or 875.4 kilogram per cubic meter, i.e. density of engine Oil, SAE 30 is equal to 875.4 kg/m³; at 30°C (86°F or 303.15K) at standard atmospheric pressure.