How much horsepower will a supercharger add to a Miata?

The first-generation NA Miata uses a turbocharger, producing about 230 horsepower. The second-generation NB opts for a supercharger to make around 220 hp.

How much does it cost to supercharge Miata?

Pricing for supercharger and full kit: Mazda Miata 89-05: Starting from 4.700 USD. The Mazda Miata MX-5 supercharger systems provides instant throttle response and a progressive power curve that increases all the way to redline without the typical spiking or surging turbochargers are known for.

How much HP can you get out of a 1.8 Miata?

A stock 94-97 1.8L in decent condition will put around 100-110 hp to the rest wheels. A small turbo at 6 psi without an inter cooler and no other changes can easily give you another 40-50 hp.

Is it worth supercharging a Miata?

Supercharged is fun, definitely gives the miata power. It’s not a turbo though so you won’t get that SURGEEEEE that 260 ft lbs of torque would give you.

How much horsepower can a Mazda Miata handle?

Maximum Horsepower and Torque the MX5 / Miata Engine can take;

Engine Damper 200-250 260-300
5 Speed Gearbox 250~ 300~
6 Speed Gearbox 330-350 400+
VLSD (1.6 Diff) 180-200 250

How much horsepower can you get out of a Miata?

The Mazda tuning specialist has created a Stage 1 turbocharger package for the ND-generation MX-5, promising to squeeze 248 hp and 236 lb-ft of torque from the car’s 2.0-liter engine. BBR says the upgrade slashes the Miata’s 0-60 time to just 5 seconds, with a top speed limited to 155 mph.

How much HP can a 1.6 Miata handle?

The 1.6 was build for boost and can handle 275 HP on stock internals and also if build right it can be made into a high revving na engine how ever there are not many low cost power modz that will give you more the 5-10 more hp.

How do I get more horsepower in my Miata?

The Top 5 Best-Bang-For-The-Buck Performance Upgrades For Your Miata

  1. #1. Tires. Yep, tires.
  2. #2. Air Intake. Finding additional power increases from the Miata is difficult, but not impossible.
  3. #3. Sway Bar Set.
  4. #4. Exhaust Header.

How much HP can a Miata handle?

How can I add more horsepower to my Miata?

Is a turbo Miata fast?

With the BBR turbocharger, Flyin’ Miata says the ND makes right around 208 hp at the wheels, which is probably close to 245 hp at the crank. That’s not quite the 430 hp the V-8 offers, but remember, a stock Miata only makes 155 hp and can still hit 60 mph in 6.0 seconds.

What kind of supercharger does Mazda Miata use?

Kraftwerks is pleased to announce the release of a brand new intercooled supercharger system for the new Mazda Miata MX-5. At the heart of the new system is the Rotrex C30-84, which is the same supercharger used in the extremely successful Kraftwerks 2006-2013 Honda Civic Si system.

What kind of supercharger does a Rotrex have?

The TDR Rotrex now comes standard with the C30-94 supercharger for all model years. This provides you with the most potential horsepower. We detune it to 10/11 psi with a larger supercharger pulley for our standard kit which uses our TDR Fuel and Timing Cards. The limiting factor of this setup is the fueling while retaining the stock ECU.

Can a Rotrex be used in a Miata?

Well, it means a TDR Rotrex kit can produce a lot more HP than we ever thought was possible on a stock engine. It also means, you can make lots of power in a Miata without necessarily rebuilding the motor with forged internals. Still want a built motor for extra security?

What kind of engine does William’s Miata use?

We have some exciting news! We installed a C30-94 kit on our Operations Manager, William’s Miata and have been running 15psi from a C30-94 since last February on a stock BP4W block (1999-2000 engine). The only modification we’ve made is replacing the factory head bolts with ARP head studs to prevent lifting the head gasket with the 15psi of boost.