How do you reset the service light on a VZ Commodore?
The VZ Service Due Reminder can easily be reset by the car owner, as follows. Ignition OFF, hold down the ‘UP’ and ‘DOWN’ buttons of the trip computer. While holding them, turn ignition ON. Keep buttons down for about three seconds.
How do you reset Verizon motor oil?
Follow the instructions below to reset the Service Engine Oil Minder Light on your Holden Commodore VZ:
- Make sure the vehicle is completely stopped.
- Press and hold the UP and DOWN navigation buttons simultaneously.
- Turn the ignition key to the “ON” position.
- Keep hold the buttons until you see SERVICE RESET?
How do I reset my VY Commodore ECU?
The fastest way to reset ECU is to take negative terminal off the battery. Pump the brake pedal till its tight. Turn the head light switch on for 10 seconds then off.
What does the power button do in a VY Commodore?
The power button only makes a difference for part-throttle driving, where it will hold the lower gears for a bit longer.
What does service engine oil mean?
If the oil service light comes on while you are driving, it means the oil pressure in the engine of your car has dropped. An engine requires a constant supply of oil typically when moving for its parts to get lubricated. Once you’ve done wiping off the dipstick, recheck the level of oil if it is low.
Will disconnecting battery reset ECU?
Will Disconnecting a Car Battery Reset The Computer? Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.
What does the power button do in a VZ Commodore?
How to reset Holden Commodore VZ service engine oil light?
To turning off the Maintenance Light on 2003, 2004, 2005, 2006 Holden VZ Adventra, conform to the following instructions: Turn the ignition “off”. Press and hold the UP and DOWN arrow buttons button, and turn the ignition switch to the “On” position, but do not start the engine. Release the button when “Service Reset?” appears on the display.
How do you reset service reset on a Commodore?
1. With the ignition OFF, press and hold the up and down buttons of the Trip Computer. 2. Turn the ignition ON while holding down both buttons. 3. Keep both buttons held in for 3 seconds Approx.. 4. Press and hold the ‘Set’ button for more than 3 seconds or until an audible alarm is heard. 5. The display shows – SERVICE RESET NO ITEMS.
How to reset the service light on a VY Commodore?
VY & VZ Commodore Service Light Reset 1 Switch ignition OFF 2 Press and hold up and down buttons 3 Switch ignition ON 4 Wait 3 seconds 5 Release up and down buttons 6 Press and hold set button 7 There will be an audible signal when the reset is complete 8 Display will now read “Service Reset No Items” 9 Release the set button 10 Switch ignition OFF
When to reset service engine oil Minder light?
When engine oil service is due, Service Engine Oil Minder Light will appear on the display. The oil service interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Engine Oil Minder Light on your Holden Commodore VZ: Don’t start the engine!