How do I fix the nF error on my Samsung washer?

How To Reset nF or 4E Error Code On Samsung Washer?

  1. Step 1: Close the Machine.
  2. Step 2: Check Water Supply Valves.
  3. Step 3: Make Sure You Supply Water into Both Entry Points.
  4. Step 4: Check for Bent Supply Pipes.
  5. Step 5: Ensure That Nothing Is Clogging the Water Supply Hose from the Inside.
  6. Step 6: Check the Water Inlets.

How do I fix error code 4E?

The first step is to turn your Samsung washer off for a few minutes before turning it back on. Often the 4E error code will resolve itself by simply turning the power off and on, as this resets your washer.

How do you reset a Samsung washer?

Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

Why is my Samsung washing machine not filling up with water?

If the water inlet valve is defective, the wash may fill slowly or not fill at all. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.

Can you manually fill a washing machine?

You can fill the wash tub manually. When the required level of water has been reached, the sensors in the tub will be able to detect. Since it’s automatic, you would have to be alert since it draws water at regular intervals.

What does error code nF mean on Samsung washer?

The main causes of the nF error code in Samsung washers. If your washing machine issues the nF error code, don’t panic. This code means that the unit doesn’t fixate water flow. The most common reason for its appearance is that the water tap is closed. You need to check the water supply, by opening the tap.

What does UE on Samsung washer mean?

When an UE error message is displayed on Samsung Washing Machine, it is indicating that the laundry load is unbalanced and has stopped the spin for safety reasons. If the door remains locked and the machine is displaying UE error, please run a drain program.

How much water should be in my Samsung front load washer?

Samsung front loader washers use approximately 13 gallons of water per cycle and the top loaders use up to 28 gallons per cycle.

What are the problems with Samsung washers?

Problem: Washer trips the electrical circuit in the home when it is turned on. There has been a recall on Samsung front load washers because water leakage onto the electrical connections of the washing machine’s thermal sensor can cause an electrical short and ignite the circuit board, posing a fire hazard to consumers.

How do you reset a Samsung front load washer?

Samsung front loader reset. Close door, press power to turn off. Unplug washer for ten minutes. Plug back in then press and hold power button for 5 seconds to reset.

What does 4e mean on Samsung washer?

Samsung washer error code 4e. The 4e error indicates that the washing machine is not getting water for some reason. This is pretty clear: you cannot hear water coming, and you cannot see it through the glass.