How do I fix F01 on my Whirlpool washer?
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. Be sure to unplug the washer before accessing internal components.
What does F01 mean on a Whirlpool washer?
The F01 error on this model washer means the relay for the drain pump motor on the main control board (CCU) has failed to activate or a communication error between the Central Control Unit (CCU) and the EEPROM onboard the CCU occurred.
What does E01 and F01 mean on a Whirlpool washer?
In Whirlpool washer error code E01 F01 is usually associated with the central control unit. And sometimes, it is associated with a transistor responsible for storing re-recordable memory. It means that if there is no information about the selected mode on it, then there will be no reaction to the commands.
What does F 1 mean on a Whirlpool dryer?
To recap, the cause of the Whirlpool Cabrio dryer F1 error code is a miscommunication between the control board and the rest of the machine. Check for any loose or damaged wires. If no loose or damaged wires are found, replace the control board and this should clear up your problem.
Why does my washer keep saying F1?
When the Whirlpool Cabrio displays an F1 error, this means the the control board is having difficulty communicating with the motor. To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in. If this doesn’t work, you will need to replace the control board.
What does Error F01 mean?
The F01 error is an internal failure of the main control board. The only thing you can do is try and reset the electronics by killing power to it at the breaker/fuse panel on your home for one full minute then restore power. If after that the problem persists the control board will need to be replaced unfortunatley.
How do I clear the error code on my whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I reset my whirlpool front load washer?
The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.
How do I fix F01 error?
What does error code F01 mean?
failed electronic machine control board
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes.
How do I fix F1 error?
How to disable the F1 key issue at Windows startup?
- Go to your BIOS and load default settings.
- If you don’t have a floppy drive then disable the Floppy Mode option in BIOS.
- Look for the option “Halt On” and set it to “No Error”.
- Save the settings and exit from BIOS.
What to do if Whirlpool dryer F01 error?
If the fuse checks out to be good then the main control board will need to be replaced to fix the F01 error. To replace the main control you will need to remove the top off the dryer, there are a few screws on the very back of the dryer lid that hold it in place, remove those and the dryer top will slide back and lift off.
Where is the thermal fuse on a whirlpool duet dryer?
To check the thermal fuse remove the bottom access panel off the front of the dryer and you will see the fuse mounted at the top of the blower wheel housing. (See Image Below) Remove the two wires and check the fuse for continuity, it should be closed.
Why is my Whirlpool duet dryer not working?
(Playback ID: tNMh9ZRs_2BbD9m7) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.